DIY Appliance Repair Tips

Wait! Before you get the itch to call an appliance repair in Lee’s Summit for assistance, you might be able to keep your household appliances running properly with the help of the tips below.

1. Smelly Washing Machine

The presence of a bad odor in a washing machine defeats the purpose of the appliance! If you are trying to wash your clothes so that they’re clean and fresh, but your appliance isn’t cooperating, run an empty cycle in warm water and pour in 2 cups of white vinegar and half of a cup of baking soda to eliminate the smell. This problem often happens in front-loading washing machines. To ensure no more future smells, prop the door open following cycles to let it dry out.

2. Inefficient Refrigerant

A warm refrigerator in the kitchen is not a welcome sign. A warm refrigerator definitely won’t keep drinks cold, and the food inside might also be on the verge of rotting! In several cases, your refrigerator won’t need professional repair; interior might just need a cleaning. Or the coils on the rear of the appliance need cleaning.

Unplug the refrigerator and move it out from the kitchen wall before cleaning the refrigerator coils. If you cannot see immediate cooling improvement, it’s time to reach out to a professional appliance repair service in Lee’s Summit for a diagnosis.

3. Clicking Igniter on Stove

If the igniter on a gas-powered oven clicks nonstop and the burner does not light, look to make sure the burner top is tightened and correctly aligned. You could possibly experience this if you have recently had a boil over or liquid spill on the top of the stove.

If that’s not the case, the cause is probably a clogged igniter. To clean , remove the burner top and wipe off any loose debris. You can use a pin to pick debris from the grooves of the igniter. If that does not fix the problem, it is safest to not take a lighter apart for anyone without the right training; in this case call on a professional appliance repair service to diagnose the issue.

4. Broken Garbage Disposal

A garbage disposal includes self-protection with its own overload trip. If it gets clogged, overheats, grinds for too long, or has another problem, the disposal could just have to be reset rather than repaired. First, please make sure the switch is turned OFF. Next, locate the reset switch on the disposal unit beneath the kitchen sink and then press the button. If the switch does not stay in, just wait a few minutes and then try again. Turn on the water from the faucet and press the button on.

If the disposal in the sink is filled up with food and you the only thing you hear is a humming noise and not food grinding, you could need to manually twist the blades using a hex key tool to clear the jam. Next, push in the reset button to get the disposal working again. If the previous tips do not get things working like normal, please don’t give in to the temptation to push one of your arms down into the disposal to investigate. Be safe and set up service with a professional appliance service in Lee’s Summit.

5. No Power from Outlet

In the kitchen or bathroom, your outlets should be equipped with GFCI switches in order to protect from harm in wet areas. If a GFCI electrical outlet is not providing power, push the red button to see if that will restore power.

If not, or if you’re trying a typical electrical outlet, make certain that a breaker hasn’t been tripped in your breaker panel. If you’re uncertain if a circuit breaker has been tripped, switch it so it is in the OFF position and back to the ON position. Just remember, safety near electricity is critical. Should you have any doubts, call a professional technician.

6. Wobbling Washing Machine

A shaking washing machine will often produce quite a startling racket and is not a ideal method to get wash clothing. If your washer is abruptly shaking around, the appliance might be broken. To repair this problem, rotate the legs of the machine to lower or lift each corner until it’s straightened out. One other likely situation is the appliance is off balance. Open the top and rearrange the clothes so that they’re more evenly dispersed within the drum of the washer.

Trying this could help your washing machine not have to work quite as hard. If you do attempt to move around the clothes a couple of times without success, do not ignore the issue. You could have a loosened drum or motor mount to repair, which can be easy enough for a professional technician to fix. But if you continue to run the washing machine when it has this problem might destroy some of the other pieces and result in a more significant repair in the future.

Call for Help

If none of these suggestions fix your problems, it is time to schedule service from Lee’s Summit Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts